If you follow the instructions in the manual for installing the CD-ROM software, but installation is not successful, use the instructions here.
Before you begin, make sure there are no CD-ROM discs in any other CD-ROM players connected to your computer. Then follow these steps:
1. Turn on the CD-ROM player by pressing the on/off switch on the back panel of the player.
2. Press the Open/Close button of the CD-ROM player to open the tray.
3. Place the CD-ROM Setup disc in the tray, with the disc label facing up.
4. Push the tray in or press the Open/Close button to close the tray.
5. Start up or restart your Macintosh computer.
6. When the disc icon appears on your screen, double-click the icon to open it.
7. Double-click the Installer icon to open it. The Install dialog box appears. Make sure the destination disk named is your startup disk. If it’s not, click Switch Disk until the correct disk is named.
8. Click Install.
9. When you see a message reporting that installation was successful, click Restart.
That’s it. You’ve installed the CD-ROM software. Make sure to remove the CD-ROM Setup disc after installing the CD-ROM software.
Problems installing with System 7.1 and an AppleCD 300i player
If you are having problems installing the CD-ROM software with System 7.1 and an internal AppleCD 300i player, follow these steps:
1. Restart your Macintosh computer.
2. Hold down the (Command), Option, P, and R keys. As soon as you hear the computer restart again, let go of the keys.
3. Go back and repeat the installation procedure above.
